Filter

• Pitch
  

  Distance between connector pin centrelines.

  • 0.30mm (1)
  • 0.50mm (9)
  • 1.00mm (3)
• Actuator Type
  

  Choose between flip or slide lock, there are more options for slide lock. See visual guide here.

  • Back Flip Lock (4)
  • Front Flip Lock (1)
  • Slide Locking Type (4)
• Cable entry type
  

  Defines the entry point of flat flexible cable, for side entry parts the cable is inserted in horizontal orientation, for top entry in vertical orientation.

  • Side (7)
  • Top (2)
• Cable contact type
  

  Horizontal connectors only

  Horizontal Flat flex connectors are either top or bottom contact. Top contacts accept flat flex cable with exposed contacts facing upwards, bottom contacts accept flat flex cable with exposed contacts facing downwards.

  FFC Cable has exposed contacts on one side and strengthened backing on the flip side. The cable contacts may be exposed on the same side (type A) or opposite sides (type D).

  Choose the appropriate combination of FFC connector contact type and FFC cable contact orientation, depending on your system design and PCB orientation.

  See our visual guide.

  • Bottom (2)
  • Top (1)
  • Dual (4)
• Profile
  

  The height profile of FFC connectors above the PCB. For connectors with latch, profile denotes the connector in closed position.

  • 1.00mm to 1.99mm (1)
  • 2.00mm to 2.99mm (6)
  • Over 3.00mm (2)

Convert to inches

Remove all selected filters